FINAL PROJECT - STAGE 003

After prototyping and experimenting with the fan a few more rounds, I found that i needed many more fans and also much more powerful fans to blow up the plastic sheets to achieve the effect I had in mind. So, I decided to make life easier, but still using the same approach.
 

 
using a potentiometer to control fan speed

using a potentiometer to control fan speed

blowing up the sheet vertically demonstrating humidity

blowing up the sheet vertically demonstrating humidity

a storm of reclaimed styrofoam demonstrating wind speed data

a storm of reclaimed styrofoam demonstrating wind speed data

balloon blown up in air demonstrating atmospheric pressure data

balloon blown up in air demonstrating atmospheric pressure data

 

I'm thinking setting up three pieces that will visualize air/wind data - wind speed / atmospheric pressure / humidity.

 
 

Before 8th
1 Prototyping

  test sizes of fans and shapes of containers
2 Components
   size
   diagram
   order
3 Program
   Arduino - the fan speed
   P5 API

Dec 9th - 15th
4 Fabrication
  
Acrylic
   Base
   Add a ultrasonic sensor to trigger the piece to start when people come close